Description

EASY UP EZ TM-30U-95 TELESCOPING MAST UPS/FedEx Shippable New Shorter Model (Old Model EZ TM 30-U is 24' 3") Genuine Easy Up Product - Made in the USA Perfect for mounting antennas for TV, Ham Radio, WIFI, Scanner, etc Use in guyed or bracketed installations 22' assembled height Mast hardware included 3 Sections of heavy duty galvanized tubing Features rotating guy rings Features a heavy duty thumbscrew/collar system for setting height Weighs 30 lbs Shipping Length: 95" Mast Section Dimensions: Bottom Section: 1-3/4" OD (18 AWG) Middle Section: 1-1/2" OD (18 AWG) Top Section: 1-1/4" OD (16 AWG) Masting is overlapped for added strength and stability. NOTE: GUYS, GUY HARDWARE, ANCHORS, AND MOUNT ARE NOT INCLUDED. * * * EASY UP PRODUCTS ARE PROUDLY MADE IN THE USA * * * Contact with a power line can KILL you. Choose a safe installation site. Mast must be guyed approximately every 9' at the top of each piece of tubing with the distance from the base of the mast to the anchor equal to the height of the mast attachment point. Anchors should be spaced every 120" if three guy directions are used, or every 90" if four guy directions are used. The base and all anchors must be properly grounded. Antenna load should not exceed 2 sq ft of surface area Do not attempt installation or dismantling if there is any wind or on a wet day Tie off mast with rope (non metal) to deflect away from power line if it should fall during installation or dismantling Use adequate and skilled help in working with this product and have an experience supervisor If you are in doubt as to the proper use or method of installation or dismantling, contact an experienced installer and your local electrical utility for assistance. Express shipping available. See shipping details for options. Illinois purchases are subject to 6.5% sales tax