Description

Please note that this item does not include any spacer pieces, as spacing would be a matter of preference where some users may opt to have their installed elements maintain some specific distance apart such as 12 inches apart, or 18 inches, etc, while others will choose to run their fan dipole with a true "fan" design where the elements would all be spreading slightly from each other as they travel out toward their ends. Half-wave Fan Dipole antenna for 40, 20, 17, 15, 12, and 10 meters with internal 1:1 choke balun. The 40 meter legs measure approximately 33 feet, 5.14 inches (33' 5.14") on each side. The 20 meter legs measure approximately 16 feet, 8.57 inches (16' 8.57") on each side. The 17 meter legs measure approximately 12 feet, 11.41 inches (12' 11.41") on each side. The 15 meter legs measure approximately 11 feet, 1.71 inches (11' 1.71") on each side. The 12 meter legs measure approximately 9 feet, 4.82 inches (9' 4.82") on each side. The 10 meter legs measure approximately 8 feet, 4.26 inches (8' 4.26") on each side. Elements will be spaced about 3/4 of an inch apart where they exit the center insulator, and will be arranged from top to bottom as large to small (40, 20, 17, 15, 12, then 10.) Made from high quality 16 AWG stranded insulated wire. Run your feed line with a PL-259 up and connect in to the SO-239 on the bottom. Color of wire insulation varies. Thanks for looking! I know there are so many listings and varieties that I have posted now, so if you're not seeing the antenna size or fan combination that you're looking for, just message me and I will give you a quote... or I'll give you the item number to punch in, if it happens to be one I already have posted somewhere out here.